specifications subject to change without notice n apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com n40 features materials contacts: silver cadmium alloy lamps: neon or fluorescent. terminals: silver plated copper illumination available actuator: nylon type 66 or pc (ul94v-2 min.) only with function 1 (on off). case: nylon type 66 (ul94v-2 min.) specifications contact ratings: 16a 125vac 1/4 hp (ul/csa). 16a 250vac 1/4 hp (ul/csa). 20a 125vac 3/4 hp 250vac (ul) 16(4)a 250v ~ t85 1e4 10(2)a 250v ~ 5e4 (vde, semco, nemco, demco, fimco, sev). initial contact resistance: 20 milliohms max. insulation resistance: 100 megohms min. at 500 v dielectric strength: 1000 vac for 1 minute electrical life: 16(4)a 250vac: 10,000 cycles 10(2)a 250vac: 50,000 cycles operating temperature range: -20c to 85c agency recognition ul, csa, vde, semko, nemko, demko, femko, & sev. models are supplied with agency markings. cost effective illuminated or non-illuminated models. single pole maintained action models. actuator and case color selections. standard actuator marking options. solder lug terminals - curved actuator rh series snap-in rocker switches quick connect terminals - curved actuator d s new! model no. circuit rh110c2nbb on off rh120c2nbb on on rh130c2nbb on off on above models have black actuator and black case. model no. circuit rh111c2nbb on off rh121c2nbb on on rh131c2nbb on off on above models have black actuator and black case.
specifications subject to change without notice n apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com 'build your own switch' order format fill in boxes with selections shown for complete model number. allowable selections are shown below each respective box. additional ordering information: commonly ordered models are shown above with complete model numbers and specificat- ions. below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simpl y selecting from all available options shown and filling in the boxes. r single pole series number electrical terminals actuator marking/ of poles functions type lens color example of completely specified model number: rh130c6glbr terminals panel cut-outs quick-connect solder lug n41 rh series snap-in rocker switches l illuminated n non-illum. * c round lens * r square lens * curved actuator only illuminated case actuator type color color a gray b black w white b black g green o orange r red w white y yellow 0 quick-connect *1 solder lug *solder lug terminals not avaible with electrical function 3 0 1 on off 2 on on 3 on off on 6 mom off mom c curved f flat s ergonomic notes: only flat actuator is available with full illumination-i.e.-no lens. ergonomic actuator available only with functions 1 & 2 and no illumination. 1 hi lo 2 no marking 3 on off 4 o i 5 o 6 o ii g green lens r red lens o orange lens 1 pnl. tk'ness. a +0, -.004 b +.006, -.0 .029-.049" 1.181" .433" .050-.078" 1.189" .433" .079-.118" 1.200" .433" new! h 1 model no. circuit RH110C2LBR on off rh120c2lbr on on rh130c2lbr on off on above models have red actuator and black case. illuminated - quick connect terminals - curved actuator
|
